Description

🛑 Sicurgas Standard Methane Gas Detector Kit with 3/4" Solenoid Valve – Complete Home Gas Safety System

Looking for a certified, highly dependable solution to protect your family and property against hazardous gas leaks? 🏠 The Sicurgas Standard Kit is an all-in-one safety ecosystem engineered to instantly detect the presence of methane gas in the air and automatically shut off the main supply, preventing the risk of fire, explosions, or asphyxiation.

The package comes complete with a high-precision gas sensor unit (equipped with powerful audible and visual warnings) and a 3/4" heavy-duty manual reset solenoid valve forged from robust brass. It is the ideal safety upgrade for residential kitchens, individual apartment gas boilers, utility rooms, or small commercial premises connected to the public gas grid. ⚙️ Your property stays safely guarded 24/7, even when you are away on travel!

🚀 Key Features & Benefits

• 🎯 Ultra-Sensitive Smart Sensor: The detector responds immediately to even microscopic concentrations of methane gas (CH4), long before it reaches a dangerous Lower Explosive Limit (LEL), triggering the safety sequence early.

• 🔒 Automated Hard Shut-Off (3/4" Valve): The millisecond a leak is verified, the sensor transmits a low-voltage electrical pulse to the 3/4" solenoid valve, mechanically snapping the gas flow shut directly at the supply pipe line.

• 🚨 Dual Visual & Audio Alerts: Features a loud built-in acoustic siren (rated at > 70 dB) paired with a flashing bright red warning LED, ensuring all occupants are alerted immediately by sound and sight.

• 🔄 Manual Safety Reset Handle: For absolute safety compliance, once the valve snaps shut, it cannot reopen automatically. The gas flow can only be re-established manually by pulling up the red locking pin—only after the leak has been resolved and the room is fully ventilated.

• 🛠️ Compact Profile & Tool-Free Sync: The wall-mounted sensor features a minimalist glossy white finish that blends cleanly onto kitchen walls. Sychronization between the wall module and the brass valve is easily achieved via a standard connection cable.

📊 Detailed Technical Specifications

💬 Frequently Asked Questions (FAQ)

❓ Where is the ideal position to mount the gas sensor from this kit?

📢 Because natural methane gas is lighter than air, it naturally rises toward the ceiling. The Sicurgas Standard detector should be mounted vertically on the wall roughly 30 to 50 cm below the ceiling line, and anywhere between 1 to 4 meters away horizontally from your gas stove or boiler. Avoid placing it directly over the burners or in areas with extreme air drafts.

❓ What should I do if the alarm goes off and the valve shuts the gas line?

📢 First, evacuate the premises immediately. Do not flip any light switches, strike matches, or use cellphones inside the zone. Open all windows wide to vent out the air. The 3/4" solenoid valve has already safely isolated the leak line. Call your emergency local gas grid provider or a certified technician to inspect the line. Do not pull the manual reset knob on the valve until the line is fully verified and cleared.

❓ Is the 3/4" pipe fitting dimension correct for my home setup?

📢 Yes, for the vast majority of standard residential properties and individual apartment setups in Romania, the pipes supplying individual wall-mounted heating boilers or main kitchen branches use a 3/4" diameter standard. (Note: standard independent gas cooktops without a boiler attached sometimes utilize a smaller 1/2" line, so always verify your pipe width before final purchase).