Alkaline detergent for heat exchangers Aluclean 1kg

Description

Alkaline detergent for heat exchangers Ferroli Aluclean 1 kg

CHARACTERISTICS AND COMPOSITION
Physical state: beige gelatinous liquid 
Odor: characteristic

Solubility in water pH at 5%: 12-14

MATERIALS
Not suitable for zinc and lead

ACTION

ALUCLEAN is a detergent formulated for the cleaning of heat exchangers contaminated by inorganic deposits. It
removes these deposits in a short time. Non-foaming. A rapid emulsion of the encrustations is obtained and also to
exploit its viscosity which allows it to hold on to vertical surfaces. Special corrosion inhibitors guarantee reliability in the use of the product.

METHOD OF USE

The product must be poured as it is evenly over the fins with contact times of no more than 15 min, rinse thoroughly with water to remove any residual product and if necessary repeat the operation on dry surfaces.

HANDLING AND STORAGE

Precautions for safe handling: keep containers tightly closed; wear the provided PPE (category III work gloves, hood visor or protective visor combined with airtight goggles if necessary mask with alkaline vapor filters, work clothes with long sleeves and safety footwear for professional use of category III); use in cool and ventilated places. The product is harmful if swallowed. Keep out of reach of children. In case of contact with eyes and skin, rinse immediately with plenty of water and seek medical advice. Take off contaminated clothing. Conditions for safe storage, including any incompatibilities: store in a cool environment and in original packaging protected from heat, frost and away from drains.