ARO-A-T6 6-stage reverse osmosis water filtration system

Description

Fitaqua ARO-A-T6 6-stage reverse osmosis water filtration system,

with a 3-stage pre-filtration, a carbon post-filter and remineralization cartridge.

Pre-filtration contains polypropylene cartridge filters and a carbon cartridge filter (granular or block)
The membrane removes 95% of the impurities present in the water, providing a pure crystalline water.
The T-mount system saves money (on purchase), reduces installation dimensions and eliminates the need to clean the housing. Also, interventions to change the filter cartridges are very easy.
Installation: in the kitchen, under the sink.
Made in EU (Poland).

The set contains: double ceramic sanitary faucet, 12 liter tank, and set of connectors.

Filter steps: 6
Permissible supply water temperature: 2 ÷ 38ºC
Cartridge types: AC-PP-10, AC-YRN-10, AC-GAC-10, AC-CTO-10, AC-SC-10, AC-IL-GAC, AC-IL-MIN, AC-IL- BIO
Supply water pressure: 2.8 ÷ 6.0 bar
Maximum allowable salinity = 2,000 ppm (mg / l)
Cartridge replacement: Pre-filter every 3-6 months, GAC every 6 months, Membrane every 2-5 years, Post-filter every 6 months
Dimensions: BxDxH = 36x15x40 cm
The maximum water flow in all types of RO depends on the type of membrane:
- for the membrane 50 GPD is 180 liters / day
- for the membrane 75 GPD is 270 liters / day
- for the membrane 100 GPD is 360 liters / day
- for the 150 GPD membrane it is 560 liters / day

* data valid under the following conditions: hardness <85 mg / l; TDS <2000 ppm; Chlorine <0.1 ppm; SDI <5; pH 3-11; Fe <0.01 mg / l; Mn <0.05 mg / l; Turbidity <1 NTU