Condensate Pump Lift Basic
Description
Condensate Pump Armstrong Lift Basic
The Lift Basic condensate pump is a fully automatic unit for the extraction of condensate,produced in gas/oil condensing boilers, air-conditioning
systems, refrigerated counters and dehumidifiers incl. collection tank. It
can be used anywhere where a condensate disposal through gravity is not
possible or where there is no direct drain. The Lift condensate pump is
designed for gas condensing boilers up to 300 kW.
The housing is made from ABS plastic and is therefore resistant to acidic
condensate (pH ≥ 3). For very acidic condensate (pH < 3), for the use of
low-sulfur heating oil and for installations/systems with over 200 kW,
it is compulsory according to ATV-DVWK-A 251 in Germany to install a
neutralisation system (see condensate pump Lift NT25 resp. additional
neutralisation tank NT50). Complementary municipal or other national
regulations must be observed where necessary.
For the use in oil condensing boilers we recommend the additional use of
an extension kit with activated carbon (see accessories for condensate
pumps).
Main areas of use
• gas condensing boilers
• oil condensing boilers
• air-conditioning systems
• refrigerators, refrigerated cabinets, refrigerated counters*
• dehumidifiers, evaporators
*) not suitable for splash water.
Flow media
• condensates with a pH ≥ 3 and a 70 °C max temperature.
• condensates with a pH over 3 have to be neutralized.
• condensates with oil residues from oil condensing boilers must be
cleaned with activated carbon (extension kit) if necessary.
Product features
• fully automatic condensate pump delivered completely ready for connection
• extremely quiet and vibration free
• very compact and space-saving construction
• fully encapsulated pump unit (IP 55) resistant to water jets from any direction
• pump unit also suitable for use in external tank (tank height min. 62 mm, max. 70 mm)
• integrated check valve for discharge hose
• condensation discharge hose (6 m, Ø 8 x 2 mm) included in delivery
• pre-mounted power cable (1.6 m) incl. shockproof plug
• overflow protection through separate float
• potential-free alarm connection (NO normally open/NC normally closed)
• pre-mounted alarm cable (0.9 m) incl. wall mounting.
Technical data
Electrical connection: 230 V, 50/60 Hz
Input power: 65 W
Alarm contact: max. 230 V, 8 A (resistive load),
NO normally open/NC normally closed
Protection class: IP 55
Medium: condensate pH ≥ 3, temperature 70 °C max
Rate of flow: max. 200 l/h
Pressure head: max. 4 m
Noise level: max. 29 dB [A]
Dimensions: 200 x 105 x 160 mm (L x W x H)
Condensate supply: Ø 24 mm
Condensate suction head: 83 mm
Tank: ABS plastic, max. 1 l/0.26 Gal
Condensation drain: nozzles for hose connection Ø 8 x 2 mm
Discharge hose: included in the scope of delivery
Weight: 1.6 kg.
Temperature range:
Ambient temperature: +5 °C to +45 °C
Media temperature: +2 °C to +70 °C
