Danfoss Icon Master Controller OTA 24V 10 channels

Description

Danfoss Icon Master Controller OTA 24V 10 channels

Danfoss Icon is a modular heating system for individual room control. It can be configured as a wired or wireless system or a combination of these, if required.

The center of the system is the Danfoss Icon 24V Master Controller, which configures the system and makes the connections within it.

With the predefined application and intuitive touch screen user interface, the Danfoss Icon 24V Master Controller controller is easy to install and configure.

Master Controller 24 V technical data sheet

The system has the following features (some of which require the Extension Module):
Automatic balancing (PWM +), through which the main controller performs the hydraulic balancing of the system based on the real demand of the camera.
Does not require reseller preset.
Possibility to switch On / Off.
N / A ND functionality of the actuator.
Change to cooling mode (requires an Extension Mode).
Supports 2, 3, or 4-pipe applications in various configurations (for all configurations, see the Extension Module guide).
Flow temperature control (requires an Extension Module) can be set to either a fixed temperature or a flow temperature based on demand.
230 V earthed outlet for circulation pump. 230 V output (for continuous operation).
Output for the heating demand signal (for example, for voltage-free relay).
It can operate wirelessly by adding a Radio Module (required for wireless installations).
Communication with main power line (for 24 V cable thermostats).
Possibility of combination between wired and wireless thermostats in the same installation.
Application function for iOS and Android devices (requires Application Module).
Software updatable through the App or the Zigbee module.
Third party integration with compatible Zigbee solutions via the Zigbee Icon module.