Inverter with charger URZ3411 PROsinus-1600 UPS 1600W

Application

For emergency power supply to computers and computer systems, servers and more. water pumps appliances included in the circulation cycle of fireplaces with water jackets providing local heating. Extremely suitable for pellet burners with a powerful lighter of 1000 W. In the event of a power failure due to an accident or system repair, the working fireplace continues to heat the water in the coil (water jacket), but the water pump does not function and this causes overheating in the part from the system near the fireplace and a severe and costly accident. To avoid this, use a UPS (Uninterruptible Power Supply) with a true sine wave and a battery that supplies voltage to the pump when the mains voltage stops. The energy released by the UPS KEMOT URZ3411 is drawn from a connected battery that charges when the system is powered at its rated voltage. The battery provides the circulation pump for several hours - sufficient to cool the fireplace or restore normal power supply. This device has a real (true) voltage sine wave, it is designed for devices that need a true sine wave to function properly. The appliance is also used for pellet burners, due to their sensitivity to electric shocks and power outages.

Additional information

To properly select the power of the device, it is advisable to consult a specialist. The power must be adapted to the power of the consumers and the type of load:

• the rated power of the device must be 20-30% higher than the power of the consumer at active load (heaters, electric ovens, furnaces, stoves, incandescent lamps, etc.) This is due to the high starting current of the loads. When the load is switched on and in the case of repeated short-term modes, the load for a short period exceeds significantly the nominal parameters specified in the load specifications.
• when used in combination with inductive load consumers, the power should be 3 to 5 times the load power consumed! (fluorescent and fluorescent lighting, motors, pumps, air conditioners, refrigerators and freezers, etc.).
• when the unit is used with capacity load consumers, the selected power must be 5 to 10 times the load power consumption! (pulse chargers, LED drivers, pulse power, etc.).

 Failure to comply with these requirements may result in the device being overloaded and no longer functioning, and accordingly the warranty will not cover the damage.