Pressure reducing Valve D04FM 1/2
Description
Pressure reducing Valve resideo D04FM 1/2"
The Braukmann D04FM pressure reducing valves protect domestic drinking water installations against high pressure the supply lines according the EN 806-2.
Within the range of their specifications, the D04FM is suitable for domestic, industrial and commercial installations.
The Braukmann D04FM pressure reducing valves protect domestic drinking water installations against high pressure and pressure surges in the supply lines according the EN 806-2. Within the range of their specifications, the D06F is suitable for domestic, industrial and commercial installations.By installing a pressure reducing valve, pressurization damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
- Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
- The valve insert is of high quality synthetic material and can be fully exchanged
- Outlet pressure adjustable with adjustment knob
- The adjustment spring is not in contact with the drinking water
- With internal and external threads 3/8" - 3/4"
- Conforms to BSEN 1567
- All materials are UBA conform
- All materials are ACS approved
SPECIFICATIONS
| Ambient Operating Temperature (Max) | 55 °C |
|---|---|
| Ambient Operating Temperature (Min) | 5 °C |
| Approvals and Standards | DVGW, WRAS (up to 23 °C), SINTEF, VA (ETA) |
| Connection Size | 1/2 in, DN15 |
| Connection Type | ODS, External Thread |
| Includes | Spring bonnet with adjustment opening, Adjustment knob, Housing with pressure gauge connection |
| Inlet Pressure (Max) | 16 bar |
| Media Temperature (Max) | 70 °C |
| Outlet Pressure (Max) | 6 kPa, 6 bar |
| Outlet Pressure (Min) | 1.5 kPa, 1.5 bar |
| Product Height | 106 mm |
| Product Length | 94 mm |
| Product Weight | 0.32 kg |
| Product Width | 44 mm |
| Seal Material | EPDM Rubber, EPDM Rubber |
| Valve Body Material | Brass, Dezincification Resistant |
| Flow Coefficient | 2.4 Kvs |
| Controlled Media | Drinking Water |
| Operating Pressure (Max) | 16 bar |
| Operating Pressure (Min) | 1 bar |
| Valve Diaphragm Material | EPDM |
| Valve Seat Material | EPDM |
| Ambient Relative Humidity (Max) | 85% Non Condensing |
| Ambient Relative Humidity (Min) | 25% Non Condensing |
