SFA Sanisub 800 Rainkit Emergency Pumping Kit | Termix.ro
Description
SFA Sanisub 800 Rainkit Heavy-Duty Storm Water Pumping Kit – Professional Dual-Pump Anti-Flooding System, 800W, 15 m³/h Flow Rate, 11m Max Head
Commercial Product Description:
The SFA Sanisub 800 Rainkit is a professional-grade, high-capacity emergency pumping solution engineered by the world-renowned SFA Group to safeguard residential basements, commercial warehouses, underground garages, and low-lying construction sites against severe flooding, heavy rain infiltration, or sudden water table rises. This comprehensive "plug-and-play" system is designed for immediate, high-volume deployment when every minute counts, offering an unmatched combination of extreme durability and industrial-strength hydraulic performance.
Unlike standard single-pump consumer alternatives, the Sanisub 800 Rainkit provides redundant reliability by featuring an advanced dual-pump configuration capable of moving an impressive 15 m³/h of water. At its core, the system utilizes premium stainless steel motor housings and drive shafts coupled with glass-fiber reinforced polypropylene (PP GF) pump casings. This rugged construction allows the pumps to handle demanding continuous duty ($S1$ rating) and safely pass suspended solids up to 20 mm in diameter. Delivered in a versatile, heavy-duty perforated protective crate that serves as a high-capacity pre-filter, this kit keeps debris out of the multi-channel impellers to ensure continuous, worry-free operation during critical storm events.
✨ Technical Advantages and Top Features
-
High-Volume Drainage Power: Delivers a maximum flow rate of up to 15 m³/h and a maximum head of 11 m, rapidly emptying flooded basements or drainage shafts.
-
Industrial Dual-Pump Reliability: Features two robust pumps working together or as a reliable backup, ensuring your property remains dry even if one circuit experiences heavy loads.
-
Rugged Material Construction: Built with stainless steel motor blocks and corrosion-resistant PA 6 GF (fiberglass-reinforced polyamide) multi-channel impellers to withstand harsh emergency environments.
-
Integrated Vertical Float Switches: Features automatic ON/OFF trigger mechanisms (starts at 250 mm, shuts off at 130 mm), allowing the pumps to operate unattended in tight sumps where traditional tethered floats would get stuck.
-
Large 20mm Solid Passage: Specially designed hydraulic paths allow the passage of leaves, mud, and gravel up to 20 mm without clogging or damaging the internal mechanisms.
-
Extended 20-Meter Cable: Outfitted with 20-meter heavy-duty power cables to reach safe power sources far away from the flooding zone without requiring risky extensions.
📊 Technical Specifications Table: SFA Sanisub 800 Rainkit
| Technical Parameter | Specification Details |
| Manufacturer | SFA Saniflo |
| Model | Sanisub 800 Rainkit |
| Device Category | Emergency Anti-Flooding / Storm Water Pumping Kit |
| Pump Materials | Stainless Steel (shaft, motor body), PP GF (housing, filter), PA 6 GF (impeller) |
| Seals | NBR (Nitrile Rubber) |
| Power Consumption (P1) | 800 W |
| Power Output (P2) | 600 W |
| Voltage / Frequency | 230 V / 50-60 Hz (Single-Phase) |
| Max Flow Rate | 15 m³/h (250 l/min) |
| Max Lift Head (HMT max) | 11 m |
| Max Submersion Depth | 7 m |
| Max Particle Size (Solid Passage) | 20 mm |
| Float Switch Operation | Automatic vertical float (ON at 250 mm / OFF at 130 mm) |
| Operating Temperature | 35 °C (continuous) / Up to 70 °C (short-term, max 5 min) |
| Total Included Pumps | 2 pumps |
| Power Cable Length | 20 m (per pump) |
| Discharge Connection Diameter | 1" 1/4 (DN 32) |
| Total Package Weight | 27.5 kg |
🛠️ Specialist's Technical Advice for Quick Deployment:
💡 Expert Recommendation: When deploying the SFA Sanisub 800 Rainkit during a flooding emergency, always keep the pumps inside their yellow perforated storage crate before lowering them into the water. The crate's design acts as an outstanding first-stage mechanical pre-filter, catching large debris like plastic bags, twigs, or construction waste that could otherwise restrict water flow.
⚠️ Post-Emergency Maintenance: Even though SFA uses highly resilient stainless steel and PA 6 GF materials, storm water is highly abrasive due to suspended silt and sand. Once the emergency is resolved, always submerge the pumps in a bucket of clean water and run them for 30 seconds. This flushes out abrasive sediment from the mechanical seals and impeller housing, preventing lockups and ensuring they are ready to start instantly during the next sudden storm.
🌧️ Do not wait for the next major storm to test your home's defenses! The SFA Sanisub 800 Rainkit is a commercial-grade, multi-pump investment that offers peace of mind when extreme weather hits. Combining massive flow rates, heavy-duty stainless steel components, and the protective pre-filtering crate, this kit represents the gold standard in emergency water evacuation. Order today on Termix.ro to secure competitive pricing, official SFA manufacturer warranty coverage, and fast shipping directly to your door! 🛒