Wired Methane Gas Detector HD100

Description

Wired Methane Gas Detector Homplex HD100

The HD100 methane gas detector is a state-of-the-art device, designed and built with a strong focus on safety.

The detector is designed to work with Normally Open or Normally Closed solenoid valves, being ideal for residential spaces. The alarm is quick and the electrovalve triggering is immediate. It allows multiple detectors to be connected to a single gas shut-off solenoid valve.

The Homplex gas detector is manufactured in Romania.

Loud alarm
You'll hear it immediately when the alarm/valve goes off thanks to the 85 decibel piezoelectric siren!

Alarm 10% L.I.E.
Increased sensitivity thanks to the high-performance SN02 sensor.

Quick release
The detector will trigger the solenoid valve just 10 seconds after the sensitivity threshold is exceeded.

NI or ND 230V?
The detector can control Normally Closed or Normally Open solenoid valves powered at 230V.

Quick activation
It only takes 15 seconds from powering up to activating methane gas detection!

Technical data
GAS DETECTED Methane gas

ALARM LEVEL 10% L.I.E.

SENSOR TYPE Semiconductor SnO2

SOLENOID VALVE RELAY CONTACT OUTPUT NI/ND max. 8 A at 250 VAC

PIEZOELECTRIC ALARM 85 dB at 1 m

OPERATING TEMPERATURE 0°C … 40°C. STORAGE TEMPERATURE – 10°C … + 50°C

HUMIDITY 20% … 80% RH (non-condensing)

ABSORBED POWER 1.5 VA

POWER SUPPLY 230V ±10% 50 / 60Hz

CHECK STATUS Test button

PROTECTION CLASS IP42

SIZE 91 x 91 x 35 mm. WEIGHT approx. 250 gr.