Gas condensing Boiler Mynute Evo X 30C

Description

Gas condensing Boiler Beretta Mynute Evo X 25C

• Stainless steel primary heat exchanger, robust and high efficiency
• Combined and heating-only models, indoor, built-in and in partially protected locations Digital HMI: touch display, icons and multilingual texts Low noise up to 45 dB
• Increased DHW production with high performance sanitary heat exchanger
• Next-generation self-adaptive combustion control Gas transformation (Propane Air, LPG) selectable with electronic parameter 9 litre expansion tank
• It has been designed to work with mixtures of NATURAL GAS and HYDROGEN, up to a maximum of 20%
• Low polluting emissions CLASS 6 (UNI EN 15502) High modulation 1:10
• IOT Ready.

Thanks to the ACC adaptive system, no dedicated codes are needed in case of LPG, because the new MYNUTE EVO X is able to automatically adapt its operation to the type of fuel. All models are also certified for use with air propane.

Deeply renewed in technology and design, MYNUTE EVO X features different advantages compared with the previous series: from the wide modulation range 1:10 on all odels, to the new heat exchanger in stainless steel with renewed adaptive combustion system and up to the new touch control, just to mention the main ones.

Common denominator of the entire range is the technological research aimed at saving energy, while offering higher comfort: from silent operation to performance, there are many improved features of MYNUTE EVO X, which the user will not fail to appreciate.

The new range comes in completely renewed aesthetic lines, conveying a modern and evolved character, which harmonizes easily in different residential settings, both in
replacement and in the new building.

Moreover, like all Beretta boilers of the new generation, MYNUTE EVO X is oriented towards the future: it is in fact suitable to operate with blends of natural gas and
hydrogen up to 20%, thus helping to reduce the impact on environment and the emissions of condensing boilers in the coming years.

MYNUTE EVO X features a new digital touchpad interface characterized by an eye-catching design, in line with the current aesthetic standards.

Designed with a particular attention to ease of use, the control panel of MYNUTE EVO X provides userfriendly access to all boiler and system settings and parameters through a simple “touch” on seven points of its surface.

Each touch activates a buzzer, that generates an acoustic feedback as a confirmation of the operation.

The 2,8’’ HMI display communicates with the user and the installer through icons, allowing an immediate understanding of the displayed function.

MYNUTE EVO X is equipped with a completely new intelligent combustion control system ACC (Active Combustion Control), which can automatically adapt to the fuel (natural gas, LPG, etc.) without use of specific codes or accessory conversion kits. This innovative and sophisticated combustion control allows self-adjustment of combustion, eliminating the need for initial calibration.The ACC system is also capable of adapting the boiler to operate with different configurations of gas, different pipe lengths and at different altitudes (within the allowed design limits). The ACC is also capable of self-diagnostics so that combustion is always under control, with emissions consistently well below regulatory limits.

“ H I G H  P E R F O R M A N C E ” D H W  P L AT E HEAT EXCHANGER
The MYNUTE EVO X “high performance” DHW exchanger, developed in-house, offers excellent comfort, along with rapid set point attainment and temperature stability during
drawing.

SILENT OPERATION
Thanks also to the new materials introduced, MYNUTE EVO X stands out for its silent operation, an improved feature if compared to the previous homonymous range and particularly appreciable in the case of installation of the boiler inside the home. In fact, the noise level ranges from 45 db(A), for the 30C model, up to 48 db(A) for the 20R model.

I N T E G R AT I O N  I N  H Y B R I D  S Y S T E M S
MYNUTE EVO X can be integrated into Beretta’s multi-energy systems (gas/electricity and renewables), through the offer of Hi, Comfort platform accessories.

E A S E  O F  I N S TA L L AT I O N  A N D MAINTENANCE
The ACC system simplifies installation. During first ignition, the new boiler does not require calibration and it is sufficient to select the type of fuel gas used by the boiler via the interface, if different from the default (natural gas). The small size and light weight make the product easily transportable during installation. Frontal accessibility to the components also
makes the product easier to maintain for the technician in charge, speeding up his intervention time.

Specifications Mynute Evo X

Useful heating thermal power = 8.2-24.4 kW; Maximum nominal thermal power = 24 kW
Hot water flow rate (at dT 25 K) = 17.2 liters/min.; thermal power Hot water =30 kW; minimum flow of hot water = 2 liters/min.
Maximum temperature allowed per round = 90oC; maximum regulated temperature = 80oC Allowed working overpressure = 3 bar.
Daily gas consumption = 23.014 kWh. Annual gas consumption = 17 GJ.
Electrical protection: IP X5D. Maximum electricity consumption = 31.1 W. Annual electricity consumption AEC = 30 kWh
Efficiency η1: up to 98%
Flue gas connection (double, coaxial) = 60/100 mm
Dimensions HxWxH =740 x 420 x 275 mm; Weight = 30 kg
Round/return connections = 3/4"; Hot/cold water connection = 1/2"; Gas connection = 3/4".