Wired Room Thermostat Unisenza Plus

Description

Wired Room Thermostat Unisenza Plus

The Unisenza Plus room thermostats 230V are wired room thermostats that are ideal for hydronic or electrical heating and cooling systems. It has a relay for a load-dependent cable connection up to 4 amps. It communicates with the Unisenza Plus Gateway via a ZigBee 3.0 protocol to allow remote access via a mobile Android or IoS APP. It also has a multifunctional input for connecting additional accessories to further optimize the application possibilities.

• Wired room thermostat for heating and/or cooling in 230V or 24V version
• Installation in standard flush-mounted box
• Ultra-slim design with a total depth of only 25 mm (the visible part on the
wall is only 10 mm)
• Can be used with or without Unisenza Plus Gateway
• Geolocation – optional and flexible temperature management through
presence detection.

Specifications

Temperature Scale °C or °F
Temperature Display Range 5 °C - 45 °C
Temperature Display Resolution 0.1 °C o 0.5 °C
Temperature Setting Range 5 °C - 40 °C
Temperature Setting Resolution 0.5 °C
Temperature Measurement Accuracy +/- 0.5 °C
Humidity Display Resolution 1% RH
Humidity Measurement Accuracy +/-5% @20%-80%RH, +/-8% @other range
Firmware update Over the air firmware update capability
Wireless Communication ZigBee 3.0, 2.4GHz
Relay switching rating 3A resistive, 1A inductive
Power Supply 230Vac +/-10% 50Hz
Operating Environment Indoor, residential & commercial
Operating Temperature 0°C – 50 °C
Storage Temperature -20 °C – 60°C
Operating/Storage Humidity 5-95% RH, non-condensing
Dimensions 86(W) x 86(D) x 27(H) mm
Ingress Protection Rating IP30
Regulation CE, UKCA
Environmental Requirement RoHS compliance