Fast cleaning and protection kit Cleanex Plus

Description

Rapid cleaning and protection kit for thermal installations Chemstal Cleanex Plus

DOCTOR CLEANEX PLUS is a super-concentrated package of cleaning and protection of heating installations with radiators that facilitates the execution of operations in thermal systems in an efficient and fast way.

✔ Super concentrated formula for fast and effective cleaning
✔ Bottles with dispenser included for easy and quick introduction of solutions into the installations
✔ Restores the efficiency of thermal transfer
✔ Protects the installation against corrosion
✔ Cleans limestone and magnetite from radiators
✔ Removes dirt from the installation
✔ Inhibits the formation of crusts and sludge br
The product cleans the installation during the use of the heating system, without the need to use a special pump for chemical washing.

The package contains:

1. Neutral agent (bottle 500ml - 1pc) - is based on a concentrated formula, being specially developed for cleaning deposits from thermal installations that have thermal transfer problems due to clogging with limescale, iron oxides and mud. The product is intended for the treatment of both new heating systems before commissioning, as well as heating systems already in operation
It is compatible with most metals (except zinc) and plastic materials used in the installation..
2. Corrosion and deposits inhibitor with protective film (500ml bottle - 1pc) - is a neutral pH corrosion inhibitor for thermal installations, formulated on the basis of a special mix of inorganic additives.
The product is based on a concentrated formula and ensures optimal protection of installations that contain elements made of aluminum and aluminum silicon alloys, steel, cast iron, copper, stainless steel and prevents the formation of bacteria in the thermal heating circuits. It also provides anti-corrosion protection of metal components by over 30% compared to the use of demineralized water as a thermal fluid.

Attention! It is not used in circuits with thermal fluid based on antifreeze or other additives.

Mode of use:

Cleaning the installation:
Step 1
Dose the neutral agent for cleaning thermal installations in the system with the help of the existing adapter in the bottle.
A single dosage is sufficient for 100 liters of water (approx. 10 radiators).
Step 2
Leave the installation in operation for 1-2 weeks (it is recommended to install a Cleanex® Mag HF1 22mm anti-magnetite filter on the return of the installation to fully retain the dirt in the circuit).
Remove the fluid from the installation and refill the system with water (demineralized water is recommended).
Step 3
Dosing the corrosion and deposit inhibitor with protective film into the system using the adapter in the bottle. A single dosage is sufficient for 100 liters of water (approx. 10 radiators).
After introducing the inhibitor the system is ready to be used.

CAUTION! It is not used in circuits with thermal fluid based on antifreeze or other additives.

*Check the characteristics of the thermal fluid every 12 months !