DHW monbloc Heat Pump 200lt Altherma M HW EKHHE200CV37

Description

DHW monbloc Heat Pump Daikin Altherma M HW 

EKHHE200CV37 200 liters

The system is made of a singly indoor unit that extracts energy from the air to provide domestic hot water. The unit collects up to 60% of its energy in the
air, while the rest is provided by electricity.

This heat pump relies on a compressor and a refrigerant to transfer the energy from the air to the water, heating the water up to your needs and delivering it into your house.

With a sound power of 51dB(A) indoor, and 44dB(A) outdoor, it is one of the most silent domestic hot water heat pump.

Daikin Altherma M HW is an air-water heat pump for the production of domestic hot water, storage in a enamelled steel tank, with condenser having an external jacket to guarantee top safety and hygiene.

• Maximum temperature of 62°C from renewable energy with heat pump alone or through a heating element (up to 75°C)
• Programmable digital interface with TOUCH keys
• Integration through Solar Thermal energy (-PCV37 model) or through a heating element (up to 75°C) on all models
• Integration with Photovoltaic Solar system.

A very simple Display:

White backlit LEDs to control temperature and features
› Red backlit LEDs for alarm warnings
› The 4 side TOUCH keys turn Daikin Altherma M HW on/off ( );
keys to browse through the MENU (SET) and increase ( + ) or decrease ( - ) settings.

Daikin Altherma M HW can be installed in any room, including non-heated
ones like garages and laundry rooms, and does not require any special work, except for the holes for the air intake and exhaust pipes.

One of the unique features of heat-pump heating systems is the fact that these units considerably reduce the temperature of the air, which is usually ejected outdoors. As well as being colder than the air in the room, the ejected air is also completely dehumidified, which is why the airflow can be conveyed back into the home to cool specific areas or rooms in summer. Installation involves doubling the exhaust pipe, on which two dampers (“A” and ”B”) are applied to convey the airflow either outside or inside the house.

• Available in wall mounted (200-260 L)
• Compact modern design
• Anti-legionella cycle
• Scheduled operation
• Automatic defrosting.

Specifications

Heat up time Max. hh:mm 06:27
COP 3.23
Domestic hot water Output Nom kW 1.34
Equivalent hot water Max l 247
Dimensions Unit Height mm 1,607 Diameter mm Top: 621, Bottom: 628
Weight Unit Empty kg 85
Installation place Indoor
IP class IP24
Refrigerant Type R-134a
GWP 1,430
Charge TCO2Eq 1.43, Charge kg 1
Heat pump
Casing Colour White
Defrost method Hot gas
Automatic defrost start °C -5
System pressure Max. bar 7
Operation range Ambient Min. °CDB -7 Max. °CDB 43
Power supply Phase 1 Frequency Hz 50 Voltage V 230
Maximum running current A 8.5
Tank
Integrated heating element power Nom. kW 1.5
Casing Material Enamelled steel
Installation Solar thermal connection possible -
Standing heat loss W 63
Power supply Phase 1 Frequency Hz 50 Voltage V 230
Domestic hot water heating
General
Declared load profile L
Water heating energy efficiency class A+
Thermostat temperature setting °C 55
Average climate AEC (Annual electricity consumption) kWh 761
ŋwh (water heating efficiency) % 135
Cold climate AEC (Annual electricity consumption) kWh 944
Warm climate AEC (Annual electricity consumption) kWh 631
Sound power level Domestic hot water heating dBA 53