Tempco Digital Thermostat 230V

Description

Non-programmable Tempco Digital Thermostat 230 V

for underfloor heating installations. Dose installation.

TempCo Digital - 230 VAC or is an electronic thermostat with heating / cooling function and temperature reduction at night (economy mode). It is an electronic thermostat with cable supply for controlling the temperature of the underfloor heating and cooling system, using thermoelectric heads / servomotors (NC); compatible with TempCo Central master thermostat.

Electronic PI regulation (hysteresis or PWM);
backlit LCD screen;
Possibility to connect a floor sensor;
3 control modes: room temperature, floor temperature, room temperature with floor temperature limitation.
Possibility of easy installation and disassembly of TempCo 230 V thermostats, thanks to the "click" function. In order to facilitate the installation of the thermostats with cable supply, a base permanently fixed to the wall is installed first, with the help of a dose. This is an important advantage during the process of covering the walls with paint or wallpaper. The experts facilitated the installation and disassembly of the thermostats, without being exposed to dirt and destruction. A removable cover protects the base.

Mounted in a wall-mounted box, 60 mm in diameter
Possibility of pilot switching at low speed (eg -2 ° C)
Temperature adjustable by: air sensor / floor sensor / both sensors in different combinations.
Amber backlight
Display of the measured temperature.
Temporary switching function in manual mode (2 h).
No noise due to TRIAC output.
Direct connection of the actuators or via the automation panel (installation details included)
Supply voltage: 230 V.
Adjustment type: two-point ON / OFF or PWM (Integral Proportional)
Accuracy: 0.1 ° C. Hysteresis: 0.5 ° C
Protection: Class II - IP 30
Power: ~ 3.5 W
Connection: 4-wire conductor 0.75 - 1.5 mm2
Temperature range: 5 .... + 30 ° C
Temperature sensor: internal electronic
Output: TRIAC 230VAC 75W (max. 10 servomotors)
Operating temperature ranges: / 0 ... + 50 ° C
Operating humidity: 95% max, no condensation.
Quick and easy installation on the wall, with the help of the base.