Sensor set Thermostatic Head RAS-C2 and TRV RA-IN 15 angle type

Description

Danfoss Sensor set with Thermostatic Head RAS-C2 and TRV RA-IN 15 Angle type

The RAS-C2 thermostatic sensor is a narrow P-band proportional automatic regulator. The RAS-C2 has a temperature range of 8 to 28°C and is equipped with a frost protection setting and a precise closure to ensure maximum flexibility.

The RAS-C2 thermostatic sensor and RA-FN valves are designed for use in 2-pipe heating systems in residential buildings. The valves are made of brass and then nickel-plated. The gland actuator pin is made of chromed steel and is operated by an annular sealing gasket, lubricated for the entire service life. The complete gland assembly can be replaced without emptying the system. The valves are supplied with a gray protective cover, which can be used for manual adjustment during the construction phase. The protective cover must not be used as a manual closing device. A special manual locking device (code no. 013G5000) must be used.

RAS-C² received the A rating for energy efficiency, according to the strict TELL (Thermostatic Efficiency Label) criteria
RAS-C² has a temperature control range from 8 to 28 ° C, as well as a position for frost protection
Valve material: nickel-plated brass
Head color: white.
Temperature regulation range: 8-28 ° C

Thermostatic head color: white RAL 9010

Valve connection: 1/2 "

Maximum operating temperature: 120 ° C; Maximum pressure: 10 bar.

Danfoss RA-IN 15 thermostatic valve, corner, 1/2 ".

The RA-IN thermostatic valve can be used as a normal radiator valve, mounted on the flow, having the advantage that a thermostatic head can be added at any time without intervening on the installation.

The built-in kv preset makes it optional to use the radiator return valve

The valve bodies are supplied with a protective cap and an adjusting ring that can be used for manual adjustment during the construction phase.

The protective cover must not be used as a manual closing device for a long time. In such cases, the use of a special manual locking device (code no. 013G5000) is recommended.

Compression fittings for 15 mm, 10 mm or 8 mm copper pipes are available for RA-N valve bodies with 3/8 ”and 1/2” connections in accordance with BSP (British standard)

Faucet bodies are made of brass and nickel plated. the gasket pressure pin is made of chromed steel and works with a permanently lubricated annular gasket. The complete gasket assembly can be replaced without emptying the system

The corner thermostatic valve from the RA-IN range comes as a straight or corner series model, but other constructive versions can be brought to order (British model, right angle with foot / left / right connection, etc.).

RA-IN 15:
kv = 0.058 -0.90 m3 / h.
Maximum pressure: 10 bar. Maximum temperature: 120oC
Fitting: 1/2 ", corner model